Chiller pipe holders
I printed these to keep the insulated chiller lines against the wall. The single clips shut. The double has a clasp on each side and takes one #6 screw in the centre.
Get the STL files
Four STLs and a print-and-fit guide. Once you unlock the set, you can download it again from your account.
Sign in with Google or an email code. Join the Hashtek mailing list to unlock your first set.
Sign in or create an accountBefore you print
Measure across the outside of the finished insulation. Each opening is 70.85 mm in diameter. The double holds the pipes 88.9 mm apart, centre to centre. If you printed the earlier double, print both new halves together. Print one and check the fit before running a batch. Use rated supports for the weight of filled pipe.
Print in PETG at 100% scale with a 0.4 mm nozzle, 0.2 mm layers, four walls and 25% infill. Stand the flat end on the bed with the pipe opening facing up. No supports needed.
